|
If a cartridge has been unused,
left empty or stored for a long period of time, the
nozzles may become clogged with dried ink residue.
Nozzles and Printheads are extremely delicate and
sensitive and can be damaged easily if any material
other than a specifically solvent is used to clean them.
Allow print heads to soak in the
Cartridge & Printhead Cleaner to refresh the print
nozzles and help restore print quality.
This Uni-kit Cartridge &
Printhead Cleaner offers an inexpensive cost method for
cleaning print heads and priming print cartridges for
refills. This is useful for those who have mono printers
who wish to refill their existing black cartridge with a
single color to enable color printing. The Cartridge
& Print Head cleaner is simply injected into the
cartridge in the same fashion as you would inject the
ink and then withdrawn back out until all ink is
removed.
THERE ARE SEVERAL WAYS TO
UTILIZE THE CARTRIDGE &PRINT HEAD
CLEANER:
I. Fill the
syringe with 2ml. Of cartridge &Print Head Cleaner
and squirt the Cartridge &Print Head Cleaner onto
the print head over the sink. Do not touch the print
head with the needle point. The dried ink will
immediately solubilize and wash away. Let it air dry and
reinsert into the printer.
II. Pour a 1/2"of
Cartridge & Print Head Cleaner in a container and
let the cartridge soak. (Use a cup the size of a coffee
mug for this procedure). Allow it to air dry and
reinstall into printer and run a cleaning cycle as per
the printer instructions.
III. Apply a small
amount of Cartridge & Print Head Cleaner in a
container onto a paper towel or soft tissue. Next, sit
the print head directly where the Cartridge &Print
Head Cleaner was applied. Allow the cartridge to sit for
2minutes and then dab it dry with a clean tissue. To
avoid damaging the printhead do not to rub the print
head on the paper towel in any manner.
IV. Prior to every
third refill, inkjet 1/2-2ml. Of Cartridge & Print
Head Cleaner (depending on the size of the cartridge),
in order to prolong the life of the sponge inside the
cartridge. Also, adding the Cartridge & Print Head
Cleaner before each refill solubilizes the trapped
residue and prevents the sponge from collecting excess
ink.
| 
